Keyboard ALT + g to toggle grid overlay
AutoCAD for Mac shortcuts & hotkey guide
Work faster and more efficiently by using the AutoCAD for Mac shortcuts below. You can find a downloadable list of shortcuts and commands in the AutoCAD for Mac Keyboard Shortcuts PDF.
One-key shortcuts
Below, you'll find the AutoCAD for Mac one-key shortcuts. Click the image for a larger view.
;void(0);)
Toggles and screen management
Toggle General Features
| Cmd-1 | Opens or closes the Tool Sets palette |
| Cmd-2 | Opens or closes the Content palette |
| Cmd-3 | Opens or closes the command window |
| Cmd-4 | Opens or closes the Layers palette |
| Cmd-5 | Opens or closes the Properties Inspector palette |
| Cmd-6 | Toggles the status bar |
| Cmd-7 | Opens or closes the Reference Manager palette |
| Cmd-8 | Opens or closes the Project Manager palette |
| Cmd-9 | Opens or closes the Material Browser palette |
| Cmd-/ | Launches the online help (browser) |
| Cmd-E | Displays the Export Data dialogue |
| Cmd-F | Displays the Find and Replace dialogue |
| Cmd-G | Groups selected objects |
| Cmd-I | Displays the Properties Inspector palette |
| Cmd-R | Regenerates the current viewport |
| Cmd-W | Closes the current drawing |
| Cmd-+ | Zooms in 2x |
| Cmd-- | Zooms out 0.5x |
| Cmd-, | Displays the Application Preferences dialogue |
| Cmd-. | Displays the Quick View dialogue |
| Cmd-Shift-C | COPYBASE |
| Shift-Cmd-; | Displays the Check Spelling dialogue |
Toggles
| Fn-F1 or Cmd-/ | Displays Help |
| Fn-F2 | Expands or collapses the display of the Command Window |
| Fn-F3 or Ctrl-F or rl-Shift-F |
Toggles object snap mode on and off |
| Fn-F4 | Toggles 3D object snap mode on and off |
| Fn-F5 | Toggles isoplane mode |
| Fn-F6 or Cmd-D or Ctrl-D |
Toggles Dynamic UCS mode on and off |
| Fn-F7 or Ctrl-G or Ctrl-Shift-G |
Toggles grid display on and off |
| Fn-F8 or Cmd-L or Shift-Cmd-O |
Toggles ortho mode on and off |
| Fn-F9 or Cmd-B or Ctrl-B |
Toggles SNAP mode on and off |
| Fn-F10 or Cmd-U or Ctrl-U |
Toggles polar tracking on and off |
| Shift-Cmd-D | Toggles Dynamic Input mode on and off |
| Shift-Cmd-F | Toggles Clean Screen mode on and off |
| Shift-Cmd-I or Shift-Ctrl-I |
Toggles Infer Constraints mode on and off |
| Shift-Cmd-T | Toggles object snap tracking on and off |
| Ctrl-I | Toggles the co-ordinates display mode |
| Ctrl-W or Ctrl-Shift-W |
Toggles Selection Cycling |
| Ctrl-H | Toggles PICKSTYLE on and off |
| Shift-Cmd-H | Toggles the display of all palettes on or off |
Manage Workflow
| Cmd-C or Ctrl-C | Copies the selected objects to the Clipboard |
| Cmd-E | Displays the Export Data dialogue box |
| Cmd-F | Displays the Find and Replace dialogue box |
| Cmd-V or Ctrl-V | Pastes the contents of the Clipboard to the current layout |
| Cmd-X or Ctrl-X | Removes the selected from the drawing and adds them to the Clipboard |
| Cmd-Y or Ctrl-Y or Shift-Cmd-Z |
Reverses the most recent undo |
| Cmd-Z or Ctrl-Z | Undoes the most recent action |
| Ctrl-[ or Ctrl-\ | Cancels |
| Shift-Cmd-; | Displays the Check Spelling dialogue box |
| Ctrl-J or Ctrl-M | Repeats the previous command |
| Shift-Ctrl-C | Copies the selected objects with a specified base point |
| Shift-Ctrl-E | Implied Face Extrusion (PressPull) |
Manage Drawings
| Cmd-An or Ctrl-A | Selects all objects in the current layout |
| Cmd-G | Groups the selected objects |
| Cmd-H | Hides AutoCAD window |
| Cmd-M | Minimises the current drawing window |
| Cmd-N or Ctrl-N | Creates new drawing |
| Cmd-O or Ctrl-O | Opens drawing |
| Cmd-P or Ctrl-P | Displays the Print/Plot dialogue box |
| Cmd-Q or Ctrl-Q | Closes the programme |
| Cmd-R | Regenerates the current viewport |
| Cmd-S or Ctrl-S | Saves the current drawing. If the drawing has not been saved yet, the Save Drawing As dialogue box is displayed |
| Cmd-W | Closes the current drawing |
| Cmd-Opt-W | Closes all drawings |
| Shift-Cmd-G | Ungroups the selected group |
| Shift-Cmd-P | Displays the Page Set Up Manager |
| Shift-Cmd-R | Regenerates all viewports in the current layout |
| Shift-Cmd-S or Shift-Ctrl-S |
Displays the Save Drawing As dialogue box |
| Ctrl-A | Selects all objects in the current layout |
| Cmd-Opt-M | Minimises all |
Manage Screen
| Fn-F11 | Hides all open windows |
| Fn-F12 | Displays dashboard |
| Cmd-1 or Ctrl-3 | Opens or closes the Tool Sets palette |
| Cmd-2 or Ctrl-2 | Opens or closes the Content palette on and off |
| Cmd-3 or Ctrl-9 | Shows or hides the Command Window |
| Cmd-4 | Opens or closes the Layers palette |
| Cmd-5 or Cmd-I or Ctrl-1 |
Opens or closes the Properties Inspector palette |
| Cmd-6 | Toggles the display of the status bar on and off |
| Cmd-7 | Opens or closes the Reference Manager palette |
| Cmd-8 or Ctrl-4 | Project Manager |
| Cmd-9 | Material Browser |
| Cmd-0 or Ctrl-0 | Toggles Clean Screen on and off |
| Cmd-- | Zooms out |
| Cmd-+ | Zooms in |
| Cmd-, | Options |
| Cmd-. or Shift- Cmd-. |
Displays the Quick View dialogue box |
| Shift-Cmd-C | Displays the Colour Palette. Select a new colour to make it the current colour for new objects |
| Cmd-Opt-H | Hides the Windows of all other applications |
| Cmd-Opt-I | Properties |
| Cmd-Opt-T | Toggles Toolset Palette |
A, B, C
A
| A | ARC/Creates an arc |
| AA | AREA/Calculates the area and perimeter of objects or defined areas |
| AC | BACTION/Adds an action to a dynamic block definition |
| AR | ARRAY/Creates multiple copies of objects in a pattern |
| ATE | ATTEDIT/Changes attribute information in a block |
| ATI | ATTIPEDIT/Changes the textual content of an attribute within a block |
| ATTE | ATTEDIT/Changes attribute information in a block |
B
| B | BLOCK/Creates a block definition from selected objects |
| BC | BCLOSE/Closes the Block Editor |
| BE | BEDIT/Opens the block definition in the Block Editor |
| BH | HATCH/Fills an enclosed area or selected objects with a hatch pattern, solid fill or gradient fill |
| BLENDSRF | SURFBLEND/Creates a transition surface between two existing surfaces or solids |
| BO | BOUNDARY/Creates a region or a polyline from an enclosed area |
| BPUB | UBLISH/Publishes a set of drawings to PDF files or printers |
| BR | BREAK/Breaks the selected object between two points |
| BS | BSAVE/Saves the current block definition |
| BVS | VSTATE/Creates, sets or deletes a visibility state in a dynamic block |
C
| C | CIRCLE/Creates a circle |
| CBAR | CONSTRAINTBAR/A toolbar-like UI element that displays the available geometric constraints on an object |
| CH | ROPERTIES/Controls properties of existing objects |
| CHA | CHAMFER/Bevels the edges of objects |
| CL | COMMANDLINE/Displays the Command Line window |
| CLIPVIEWPORT | VPCLIP/Clips layout viewport objects and reshapes the viewport border |
| CO | COPY/Copies objects a specified distance in a specified direction |
| COL | COLOUR/Sets the colour for new objects |
| COMMANDHIDE | COMMANDLINEHIDE/Hides the Command Line window |
| CREASE | MESHCREASE/Selects mesh subojects to crease |
| CREATESOLID | SURFSCULPT/Converts a group of surfaces that enclose a watertight region to a 3D solid |
| CSETTINGS | CONSTRAINTSETTINGS/Controls the display of geometric constraints on constraint bars |
| CT | CTABLESTYLE/Sets the name of the current table style |
| CUBE | NAVVCUBE/Controls the visibility and display properties of the ViewCube tool |
| CURVATURE ANALYSIS | ANALYSISCURVATURE/Evaluates areas of high and low surface curvature by displaying a colour gradient |
| CUSTOMISE | CUI/Manages the customised user interface elements |
| CYL | CYLINDER/Creates a 3D solid cylinder |
D, E, F
D
| D | DIMSTYLE/Creates and modifies dimension styles |
| DAL | DIMALIGNED/Creates an aligned linear dimension |
| DAN | DIMANGULAR/Creates an angular dimension |
| DAR | DIMARC/Creates an arc length dimension |
| DBA | DIMBASELINE/Creates a linear, angular or ordinate dimension from the baseline of the previous or selected dimension |
| DCE | DIMCENTER/Creates the centre mark or the centrelines of circles and arc |
| DCO | DIMCONTINUE/Creates a dimension that starts from an extension line of a previously created dimension |
| DCON | DIMCONSTRAINT/Applies dimensional constraints to selected objects or points on objects |
| DDA | DIMDISASSOCIATE/Removes associativity from selected dimensions |
| DDI | DIMDIAMETER/Creates a diameter dimension for a circle or an arc |
| DDPTYPE | PTYPE/Specifies the display style and size of point objects |
| DDVPOINT | VPOINT/Sets the viewing direction for a 3D visualisation of the drawing |
| DED | DIMEDIT/Edits dimension text and extension lines |
| DELCON | DELCONSTRAINT/Removes all geometric and dimensional constraints from a selection set of objects |
| DI | DIST/Measures the distance and angle between two points |
| DIV | DIVIDE/Creates evenly spaced point objects or blocks along the length or perimeter of an object |
| DJL | DIMJOGLINE/Adds or removes a jog line on a linear or aligned dimension |
| DJO | DIMJOGGED/Creates jogged dimensions for circles and arcs |
| DL | DATALINK/Displays the Data Link dialogue box |
| DLI | DIMLINEAR/Creates a linear dimension |
| DLU | DATALINKUPDATE/Updates data to or from an established external data link |
| DO | DONUT/Creates a filled circle or a wide ring |
| DOR | DIMORDINATE/Creates ordinate dimensions |
| DOV | DIMOVERRIDE/Controls overrides of system variables used in selected dimensions |
| DR | DRAWORDER/Changes the draw order of images and other objects |
| DRA | DIMRADIUS/Creates a radius dimension for a circle or an arc |
| DRAFTANGLE ANALYSIS | ANALYSISDRAFTANGLE/Evaluates whether a model has adequate draught draft between a part and its mould |
| DRE | DIMREASSOCIATE/Associates or re-associates selected dimensions to objects or points on objects |
| DRM | DRAWINGRECOVERY/Displays a list of drawing files that can be recovered after a programme or system failure |
| DS | DSETTINGS/Sets grid and snap, polar and object snap tracking, object snap modes, Dynamic Input and Quick Properties |
| DT | TEXT/Creates a single-line text object |
| DV | DVIEW/Defines parallel projection or perspective views by using a camera and target |
E
| E | ERASE/Removes objects from a drawing |
| ED | DDEDIT/Edits single-line text, dimension text, attribute definitions and feature control frames |
| EL | ELLIPSE/Creates an ellipse or an elliptical arc |
| ER | EXTERNALREFERENCES/Opens the External References palette |
| EX | EXTEND/Extends objects to meet the edges of other objects |
| EXIT | QUIT/Exits the programme |
| EXP | EXPORT/Saves the objects in a drawing to a different file format |
| EXT | EXTRUDE/Extends the dimensions of a 2D object or 3D face into 3D space |
| EXTENDSRF | SURFEXTEND/Creates new surface by extending existing surface |
F
| F | FILLET/Rounds and fillets the edges of objects |
| FILLETSRF | FILTER/Creates new surface by filleting existing surface |
| FREEPOINT | POINTLIGHT/Creates lighting effect that radiates in all directions from its location |
| FSHOT | FLATSHOT/Creates a 2D representation of all 3D objects based on the current view |
| FULLSCREEN | CLEANSCREENON/Clears the screen of the menu bar and all palettes |
| FULLSCREENOFF | CLEANSCREENOFF/Restores the state of display before CLEANSCREENON was used |
G, H, I
G
| G | GROUP/Creates and manages saved sets of objects called groups |
| GCON | GEOCONSTRAINT/Fills an enclosed area or selected objects with a gradient fill |
| GD | GRADIENT/Fills an enclosed area or selected objects with a gradient fill |
| GENERATESECTION | SECTIONPLANETOBLOCK/Saves 2D and 3D sections as blocks |
H
| H | HATCH/Fills an enclosed area or selected objects with a hatch pattern, solid fill or gradient fill |
| HB | HATCHTOBACK/Sets the draw order for all hatches in the drawing to be behind all other objects |
| HE | HATCHEDIT/Modifies an existing hatch or fill |
| HI | HIDE/Regenerates a 3D wireframe model with hidden lines suppressed |
I
| I | INSERT/Inserts a block or drawing into the current drawing |
| IAD | IMAGEADJUST/Controls the image display of the brightness, contrast and fade values of images |
| IAT | IMAGEATTACH/Inserts a reference to an image file |
| ICL | IMAGECLIP/Crops the display of a selected image to a specified boundary |
| ID | ID/Displays the UCS co-ordinate values of a specified location |
| IM | IMAGE/Displays the External References palette |
| IMP | IMPORT/Imports files of different formats into the current drawing |
| IN | INTERSECT/Creates a 3D solid, surface or 2D region from overlapping solids, surfaces or regions |
| INF | INTERFERE/Creates a temporary 3D solid from the interferences between two sets of selected 3D solids |
| ISOLATE | ISOLATEOBJECTS/Displays selected objects across layers; unselected objects are hidden |
J, K, L
J
| J | JOIN/Joins similar objects to form a single, unbroken object |
| JOG | DIMJOGGED/Creates jogged dimensions for circles and arcs |
| JOGSECTION | SECTIONPLANEJOG/Creates a section plane that has multiple segments |
K
L
| L | LINE/Creates straight line segments |
| LA | LAYER/Manages layers and layer properties |
| LAS | LAYERSTATE/Saves, restores and manages named layer states |
| LAYERFREEZE | LAYFRZ/Freezes the layer of the selected object |
| LAYERHIDE | LAYOFF/Turns off the layer of a selected object |
| LAYERI SOLATE | LAYISO/Hides or locks all layers except those of the selected objects |
| LAYERL OCK | LAYLCK/Locks the layer of a selected object |
| LAYERMAKE CURRENT | LAYMCUR/Sets the current layer to that of a selected object |
| LAYERMATCH | LAYMCH/Changes the layer of a selected object to match the destination layer |
| LAYERUNISOLATE | LAYUNISO/Restores all layers that were hidden or locked with the LAYISO command |
| LAYERUNLOCK | LAYULK/Unlocks the layer of a selected object |
| LE | QLEADER/Creates a leader and leader annotation |
| LEN | LENGTHEN/Changes the length of objects and the included angle of arcs |
| LESS | MESHSMOOTHLESS/Decreases the level of smoothness for mesh objects by one level |
| LI | LIST/Displays property data for selected objects |
| LO | LAYOUT/Creates and modifies drawing layout tabs |
| LT | LINETYPE/Loads, sets and modifies linetypes |
| LTS | LTSCALE/Changes the scale factor of linetypes for all objects in a drawing |
| LW | LWEIGHT/Sets the current lineweight, lineweight display options and lineweight units |
M, N, O
M
| M | MOVE/Moves objects a specified distance in a specified direction |
| MA | MATCHPROP/Applies the properties of a selected object to other objects |
| ME | JOIN/Joins similar objects to form a single, unbroken object |
| MEA | MEASUREGEOM/Measures the distance, radius, angle, area and volume of selected objects or sequence of points |
| MI | MIRROR/Creates a mirrored copy of selected objects |
| ML | MLINE/Creates multiple parallel lines |
| MLA | MLEADERALIGN/Aligns and spaces selected multileader objects |
| MLC | MLEADERCOLLECT/Organises selected multileaders that contain blocks into rows or columns and displays the result with a single leader |
| MLD | MLEADER/Creates a multileader object |
| MLE | MLEADEREDIT/Adds leader lines to, or removes leader lines from, a multileader object |
| MLS | MLEADERSTYLE/Creates and modifies multileader styles |
| MO | PROPERTIES/Controls properties of existing objects |
| MORE | MESHSMOOTHMORE/Increases the level of smoothness for mesh objects by one level |
| MS | MSPACE/Switches from paper space to a model space viewport |
| MT | MTEXT/Creates a multi-line text object |
| MV | MVIEW/Creates and controls layout viewports |
N
| NETWORKSRF | SURFNETWORK/Creates non-planar surfaces in the space between edge sub-objects, splines and other 2D and 3D curves |
| NEWPROJECT | NEWSHEETSET/Creates a new project data (DST) file that manages drawing layouts, file paths and project information |
| NVIEW | VIEW/Saves and restores named views, camera views, layout views and preset views |
O
| O | OFFSET/Creates concentric circles, parallel lines and parallel curves |
| OBJECTSELECTION LIMIT | OPTIONS/Customises the programme settings |
| OFFSETSRF | SURFOFFSET/Creates a parallel surface or solid by setting an offset distance from a surface |
| OP | OPTIONS/Customises the programme settings |
| OPENPROJECT | SURFOFFSET/Creates a parallel surface or solid by setting an offset distance from a surface |
| ORBIT | 3DORBIT/Rotates the view in 3D space, but constrained to horizontal and vertical orbit only |
| OS | OSNAP/Sets running object snap modes |
P, Q, R
P
| P | PAN/Moves the view planar to the screen |
| PA | PASTECLIP/Pastes objects from the Clipboard into the current drawing |
| PALETTE SCLOSE | TOOLSETSCLOSE/Closes the tool palettes window |
| PAR | PARAMETERS/Controls the associative parameters used in the drawing |
| PARAM | BPARAMETER/Adds a parameter with grips to a dynamic block definition |
| PATCH | SURFPATCH/Creates a new surface by fitting a cap over a surface edge that forms a closed loop |
| PE | PEDIT/Edits polylines and 3D polygon meshes |
| PGP | ALIASEDIT/Creates, modifies and deletes AutoCAD command aliases. |
| PL | PLINE/Creates a 2D polyline |
| PM | SHEETSET/Opens the Project Manager |
| PMAUTOOPEN | SSMAUTOOPEN/Controls the display behaviour of the Project Manager when a drawing associated with a layout is opened. |
| PMFOUND | SSFOUND/Displays the path and file name if a search for a project file is successful |
| PMHIDE | SHEETSETHIDE/Closes the Project Manager |
| PMLAYOUT STATUS | SMSHEETSTATUS/Controls how the status data in a project is refreshed |
| PMLOCATE | SSLOCATE/Controls whether the project associated with a drawing is located and opened when the drawing is opened |
| PMPOLLTIME | SSMPOLLTIME/Controls the time interval between automatic refreshes of the status data in a project |
| PMSTATE | SSMSTATE/Indicates whether the Project Manager window is open or closed |
| PO | POINT/Creates a point object |
| POFF | HIDEPALETTES/Hides currently displayed palettes (including the command line) |
| POINTOFF | CVHIDE/Hides the control vertexes for both NURBS surfaces and curves |
| POINTON | CVSHOW/Displays the control vertexes for both NURBS surfaces and curves |
| POL | POLYGON/Creates an equilateral closed polyline |
| PON | SHOWPALETTES/Restores the display of hidden palettes |
| PR | PROPERTIES/Displays Properties palette |
| PRCLOSE | PROPERTIESCLOSE/Closes the Properties Inspector palette |
| PRE | PREVIEW/Displays the drawing as it will be plotted |
| PREF | OPTIONS/Customises the programme settings |
| PLOT/Plots a drawing to a plotter, printer or file | |
| PS | PSPACE/Switches from a model space viewport to paper space |
| PSOLID | POLYSOLID/Creates a 3D wall-like polysolid |
| PU | PURGE/Removes unused items, such as block definitions and layers, from the drawing |
| PYR | PYRAMID/Creates a 3D solid pyramid |
Q
| QSAVE | QSAVE/Saves the current drawing |
| QVD | QUICKVIEW/Displays a list of all open drawings and the layouts contained in the current drawing or the selected drawing when more than one drawing is open |
R
| R | REDRAW/Refreshes the display in the current viewport |
| RA | REDRAWALL/Refreshes the display in all viewports |
| RE | REGEN/Regenerates the entire drawing from the current viewport |
| REA | REGENALL/Regenerates the drawing and refreshes all viewports |
| REBUILD | CVREBUILD/Rebuilds the shape of NURBS surfaces and curves |
| REC | RECTANG/Creates a rectangular polyline |
| REFINE | MESHREFINE/Refines mesh objects |
| REG | REGION/Converts an object that encloses an area into a region object |
| REN | RENAME/Changes the names assigned to items such as layers and dimension styles |
| REV | REVOLVE/Creates a 3D solid or surface by sweeping a 2D object around an axis |
| RO | ROTATE/Rotates objects around a base point |
| RR | RENDER/Creates a photorealistic or realistically shaded image of a 3D solid or surface model |
| RW | RENDERWIN/Displays the Render window without starting a rendering operation |
S, T, U
S
| S | STRETCH/Stretches objects crossed by a selection window or polygon |
| TC | SCALE/Enlarges or reduces selected objects, keeping the proportions of the object the same after scaling |
| SCR | SCRIPT/Executes a sequence of commands from a script file |
| SE | DSETTINGS/Sets grid and snap, polar and object snap tracking, object snap modes and Dynamic Input |
| SEC | SECTION/Uses the intersection of a plane and solids, surfaces or mesh to create a region |
| SELECTIONLIMIT | PROPOBJLIMIT/Limits the number of objects that can be changed at one time with the Properties Inspector |
| SET | SETVAR/Lists or changes the values of system variables |
| SHA | SHADEMODE/Starts the VSCURRENT command |
| SL | SLICE/Creates new 3D solids and surfaces by slicing or dividing, existing objects |
| SMOOTH | MESHSMOOTH/Converts 3D solids, surfaces and legacy mesh objects to the enhanced mesh object for smoothing, refinement, creasing and splitting |
| SN | SNAP/Restricts cursor movement to specified intervals |
| SO | SOLID/Creates solid-filled triangles and quadrilaterals |
| SP | SPELL/Checks spelling in a drawing |
| SPE | SPLINEDIT/Edits a spline or spline-fit polyline |
| SPL | SPLINE/Creates a smooth curve that passes through or near specified points |
| SPLANE | SECTIONPLANE/Creates a section object that acts as a cutting plane through 3D objects |
| SPLAY | SECTIONPLANE/Creates one or more section objects and places them throughout a 3D model |
| SPLIT | MESHSPLIT/Splits a mesh face into two faces |
| SSM | SHEETSET/Opens the Sheet Set Manager |
| TS | STYLE/Creates, modifies or specifies text styles |
| SU | SUBTRACT/Combines selected 3D solids, surfaces or 2D regions by subtraction |
T
| T | MTEXT/Creates a multi-line text object |
| TA | TEXTALIGN/Aligns multiple text objects vertically, horizontally or obliquely |
| TB | TABLE/Creates an empty table object |
| TEDIT | TEXTEDIT/Edits a dimensional constraint, dimension or text object |
| TEXTSTYLE EDIT | STYLE/Creates, modifies or specifies text styles |
| TH | THICKNESS/Sets the default 3D thickness property when creating 2D geometric objects |
| TI | TILEMODE/Controls whether paper space can be accessed |
| TO | TOOLSETS/Opens the Tool Sets palette |
| TOL | TOLERANCE/Creates geometric tolerances contained in a feature control frame |
| TOR | TORUS/Creates a doughnut-shaped 3D solid |
| TP | CONTENT/Opens the Content palette |
| TR | TRIM/Trims objects to meet the edges of other objects |
U
| U | UNDO/Reverses the most recent action |
| UC | UCSMAN/Manages defined user co-ordinate systems |
| UN | UNITS/Controls co-ordinate and angle display formats and precision |
| UNCREASE | MESHUNCREASE/Removes crease from selected mesh object |
| UNHIDE | UNISOLATEOBJECTS/Displays objects previously hidden with the ISOLATEOBJECTS or HIDEOBJECTS command |
| UNI | UNION/Unions two solid or two region objects |
V, W, X
V
| V | VIEW/Saves and restores named views, camera views, layout views and preset views |
| VIEWPORTCLIP | VPCLIP/Clips layout viewport objects and reshapes the viewport border |
| VP | VPOINT/Sets the viewing direction for a 3D visualisation of the drawing |
| VPLAY | VIEWPLAY/Plays the animation associated to a named view |
| VPORT | VPORTS/Creates multiple viewports in model space or paper space |
| VS | VSCURRENT/Sets the visual style in the current viewport |
W
| W | WBLOCK/Writes objects or a block to a new drawing file |
| WE | WEDGE/Creates a 3D solid wedge |
| WHEEL | NAVSWHEEL/Displays a wheel that contains a collection of view navigation tools |
X
| X | EXPLODE/Breaks a compound object into its component objects |
| XA | XATTACH/Inserts a DWG file as an external reference (xref) |
| XB | XBIND/Binds one or more definitions of named objects in an xref to the current drawing |
| XC | XCLIP/Crops the display of a selected external reference or block reference to a specified boundary |
| XL | XLINE/Creates a line of infinite length |
| XR | XREF/Starts the EXTERNALREFERENCES command |
Y, Z, #
Y
Z
| Z | ZOOM/Increases or decreases the magnification of the view in the current viewport |
| ZEBRA | ANALYSISZEBRA/Projects stripes onto a 3D model to analyse surface continuity |
| ZIP | ETRANSMIT/Creates a self-extracting or zipped transmittal package |
#
| 3A | 3DARRAY/Creates copies of objects arranged in a 3D pattern |
| 3AL | 3DALIGN/Aligns objects in 3D |
| 3DMIRROR | MIRROR3D/Mirrors objects across a specified mirroring plane |
| 3DO | 3DORBIT/Rotates the view in 3D space, but constrained to horizontal and vertical orbit only |
| 3F | 3DFACE/Creates a 3D polyface mesh by specifying each vertex; also can specify whether an edge segment is invisible |
| 3M | 3DMOVE/Moves selected objects along an axis or plane |
| 3P | 3DPOLY/Creates a 3D polyline |
| 3R | 3DROTATE/Rotates selected objects about a specified axis |
| ARU | ACTUSERINPUT/Pauses for user input in an action macro |
| 3S | 3DSCALE/Scales selected objects along a specified plane or axis or uniformly along all 3 axes |
